ULTIM8™ VAT - Ultimate VAT Cleaning Tool

features a grit-blasted surface for optimal texture—allowing it to grip but easily release cured resin. Its multiple-stage oxidation and anodization process ensures a durable, hard exterior finish, making it nearly indestructible. Resistant to prolonged exposure to resin, IPA, and all solvents, the ULTIM8™ VAT is built to last. What's Included: 1 ULTIM8™ VAT Composition: The ULTIM8™ VAT is made of a single piece of diecast aluminum alloy. It has been treated with a multiple oxidation and anodization process to ensure a hard external finish. It is nearly indestructible, and resistant to long periods in resin, IPA, and all solvents. Specifications: Die cast aluminum alloy Grit Blasted, Oxidized, Anodized 40 x 40 x 80mm tall 64 g Click here for the downloadable instructions. Attention: when working with resin always use the appropriate eye protection and gloves to avoid contact with the resin. Steps for Use: +Preparation Raise your build plate toward the top of the Z-axis. If your resin has been sitting for more than a few days, mix it thoroughly to prevent separation, which can lead to incurable areas. Use a soft silicone spatula, such as Wham Bam’s ULTIM8™ WYP, to gently stir the resin in the vat, ensuring a homogeneous solution. While mixing, check for any hardened pieces in the vat; if found, carefully remove and dispose of them. +Screen Cleaning Place your ULTIM8™ VAT base down toward the corner of your vat, it should be positioned in such a way that 75-80% of the tool overlays the screen and the rest overlays the border such that it provides a great corner peel. Use a light pressure down while swirling slightly the ULTIM8™ VAT to ensure the bottom releases and makes contact with the FEP. Use your machine control panel to find the screen clean function and activate it. Hold down the ULTIM8™ VAT while the cleaning cycle is active. When the cleaning function is finished, use a piece of cardboard or tray as a drip catcher while lifting upward in a prying motion on the handles of the ULTIM8™ VAT to lift a cured flat layer of resin out of the vat. Allow the excess resin to drip off. Frequently, you can find ways of hanging the ULTIM8™ VAT by the handle on your build plate holder, or download our free drip holder or the Whammy head holder. +Clean Up When done dripping, remove the whole tool and resin. Peel the cured resin off of the ULTIM8™ VAT. Dispose of the cured resin and drop your ULTIM8™ VAT in some IPA for a final clean. If you have any resin remaining in the bottom grooves, leave the ULTIM8™ VAT in IPA overnight and the remnants will drop right out. You are ready to print! Note: If you observe significant chunks or other particles remaining in your resin, it's advisable to remove the vat, strain it using a funnel and strainer like our ULTIM8™ FUN, and thoroughly clean your equipment. +Printable Drip Holder Anycubic Photon M3 Plus Elegoo Mars 3 Elegoo Mars 5 Ultra Elegoo Saturn 3 Elegoo Saturn 3 - Whammy Head Version Elegoo Saturn 4 Ultra